Congratulations to Osamu Suzuki from NAMICS Corporation being named a Fellow of Society from IMAPS. Suzuki-san earn this distinction due to his technical contribution to electronics packaging, years of dedication and support of IMAPS in multiple leadership roles and numerous contributions to the organization worldwide.
NAMICS has developed a spray-able material with high shielding capability to replace the need to use sputtering equipment for high volume manufacturing requires high capital investment cost and slow production speeds. This material offers a thin, uniform coating on both the top and side walls of the package to both molded and copper surfaces. The formulation offers excellent work-ability with long, stable work life (over 24 hours) and different spray technologies.
NAMICS EMI shielding technology provides a simplified process with easy production and maximum design flexibility offering excellent adhesion strength and high shielding at very thin coatings (less than 5 um).
- XH9493-50 is a thermosetting EMI shielding paste with high shielding capability.
- Customization is possible to accommodate various spray equipment and applications.
- Please contact us to arrange for samples designed for your equipment and application.
NAMICS Corporation has developed a sintered silver die attach paste (UNIMEC H9890-6A) for the semiconductor market. UNIMEC H9890-6A is a low-temperature sintered die attach paste using the Metallo-Organic (MO) technology. This high thermal conductive paste does not require pressure while curing, and the porous sintered structure has been reinforced by a proprietary resin system. This material has been developed for replacing eutectic solders offering the same thermal performance as AuSn solder.
UNIMEC H9890-6A has passed both NASA Outgassing and MIL-STD-883 testing. UNIMEC H9890-6A can be applied using needle or auger dispensing, but it also can be jetted. For screen printing applications, NAMICS offers XH9890-7A. UNIMEC XH9890-7A has similar thermal properties to H9890-6A but the rheology has been tailored for screen printing.
UNIMEC H9890-6A is in full production and is available for sampling. Standard packaging is frozen syringes with 10 grams in a 5cc syringe; larger syringes are available. To find out more about these NAMICS sintered silver materials, please visit this link or contact your local NAMICS sales representative.
G8345D & G8345-6 (Dam & Fill)
NAMICS Corporation has developed an epoxy dam material (CHIPCOAT G8345D) and an accompanying epoxy fill material (CHIPCOAT G8345-6) for the semiconductor market. Dam-and-Fill materials encapsulate your wire bonded device as an electrically insulating material. Dispensing a high-viscosity dam followed by a low-viscosity fill, will create a completed encapsulated package for your CSP and BGA. CHIPCOAT G8345D and G8345-6 are fast curing, low CTE (low stress), offer high package reliability and reduced warpage.
CHIPCOAT G8345D and G8345-6 are in full production and are available for sampling. Standard packaging is frozen syringes with 50 grams in a 30cc syringe; larger cartridges are available. To find out more about these NAMICS Dam-and-Fill materials, please visit this link or contact your local NAMICS sales representative.
December 27, 2017: Recently, we determined that counterfeit products with the NAMICS logo have been sold illegally in some overseas countries.
The NAMICS logo and trademarks are used on the counterfeit products without our permission. However, it is difficult to determine from their appearance whether the products are genuine NAMICS products or counterfeit.
Therefore, to prevent acquiring counterfeit products, please purchase NAMICS products only through our sales office, overseas sales subsidiaries or designated sales agencies.
Please contact our sales office or sales subsidiaries to verify our designated sales agencies. You can also check the NAMICS authorized global network on our website at: http://www.namics.co.jp/e/company/kaigai.html
While we are taking appropriate measures to eliminate the counterfeit items, PLEASE NOTE THAT NAMICS HAS NO RESPONSIBILITY FOR ANY DAMAGE ARISING FROM OR IN CONNECTION WITH THE USE OF COUNTERFEIT PRODUCTS.
If you have any questions, please contact us through our website at: http://www.namics.co.jp/e/contact/
We appreciate your business and look forwarding to supporting your needs with genuine Namics Products.